- UPGRADE 2014 MACBOOK PRO SSD HOW TO
- UPGRADE 2014 MACBOOK PRO SSD UPGRADE
- UPGRADE 2014 MACBOOK PRO SSD FULL
- UPGRADE 2014 MACBOOK PRO SSD MAC
However, the Mac mini has the Nvidia MCP79 controller, and after extensive googling I found out I couldn’t use the Kingston or other Sandforce SSD’s, at least not at maximum speed. See for your machine’s specs. The Kingston is a top-value Sandforce drive. The Kingston SSDNow V300 I chose for the White MacBook 4,1 has the SF-2281, but since the MacBook doesn’t have the MCP79 and doesn’t support 3Gbps SATA in the first place, there’s no issue.
In short: Nvidia MCP79 + Sandforce SF-2281 = no good. SSD’s that have the Sandforce SF-2281 controller are most problematic, and the SF-2281 happens to be one of the most common ones. Here, you’ll also see the negotiated SATA link speed. You can check if you have the MCP79 by going to the upper left hand corner Apple menu, choosing About This Mac, More Info, System Report and the SATA section. Even if you can’t get 6Gbps like modern machines, you’re still much better off with 3Gbps than 1.5Gbps if you have a choice. The bad combination might give you other issues as well.
UPGRADE 2014 MACBOOK PRO SSD FULL
Those Macs will not work with their full 3Gbps link speed with a lot of current SSD’s, instead falling back to 1.5Gbps only. You need to be careful when choosing your brand, since many Macs built around 2007–2011 come with the buggy Nvidia MCP79 SATA controller. Just one catch: Not all SSDs will always work as fast as you’d want. It makes a big difference in daily use for fairly low cost.
UPGRADE 2014 MACBOOK PRO SSD HOW TO
That’s how to finish the MacBook pro hard drive upgrade.SSDs (solid-state drives) are much faster than old-school hard drives, making it possible to get a few more years of life out of an old, slow computer by upgrading it to a faster drive. Attach the back cover and screw in the ten tiny screws.Put the SSD to the same place as the old hard drive.Attach the SATA ribbon to the new SSD you prepared gently.Put back the four torx screws you have removed from the old hard drive.Remove the four Torx screws on the hard drive with the Torx head screwdriver you prepared.Swing the connector to disconnect the SATA ribbon attached to one end.Then, remove the bracket and the hard drive. Unscrew the two black screws on the plastic bracket securing the hard drive.Take the cover off and release the static electricity by touching the metal part.Remove the screws with the small screwdriver you have prepared (put the screws together into a container so you won’t lose any of them).Step 4: copy the hard drive of your Mac to the SSD. Select the new SSD from the left sidebar.Choose View and Show All Devices in order.Connect the new SSD to your Mac via the cable or dock you prepared.A Torx head screwdriver used to disassemble the old hard drive.A small screwdriver used to open Mac cover.The capacity: keep a balance between capacity and price.
UPGRADE 2014 MACBOOK PRO SSD UPGRADE
Tip: If you find your Mac hard drive is failing, please hurry to recover data from the failing hard drive and upgrade it with SSD.